- 5 -
- 6 -
Remote Subwoofer Control
MIN
MAX
INPUT WIRING DIAGRAM
PWR/PRT
GAIN
LPF
SUB SONIC
BASS BOOST
PHASE
MIN
MAX 50Hz 250Hz
0dB 12dB
0
180
OUTPUT
L
R
INPUT
20Hz 50Hz 30Hz 80Hz
0
0
FREQ
LEVEL
OUTPUT
MASTER
INPUT
SLAVE
REMOTE GAIN
G1-1000x1DG
L
R
Low level input:
These are driven by the line output of your in dash radio or
intermediate signal processor, Separate Left and Right signals can be applied for
Stereo or Mono operation but both inputs must be driven with the same signal for
proper Bridged operation. If only mono signal is available, a "Y" adapter is
required.
STEREO MODE
SPEAKER
OUTPUT
REM
GND
+12V
FUSES
G1-1000x1DG
SPEAKER
OUTPUT
REM
GND
+12V
FUSES
G1-1000x1DG
SPEAKER
2~4 Ohm
SPEAKER
2~4 Ohm
SPEAKER
1~4 Ohm
Note that the monoblock speakers have been connected to the four terminal following
the (+) and (-) graphic. Your speaker terminals may be marked (+) and (-) or there may
be a red dot by one terminal which means the same as (+).
Connecting the speakers in this manner ensures that the two speaker cones will move in
and out together according to the original recording. If one of the two speakers is
reversed, stereo imaging and bass response will be degraded.
Summary of Contents for G1-1000X1DG
Page 1: ......