English
-41-
Frequency
Use the light frequency setting to prevent the LCD from flickering caused by the local
power supply’s frequency
To set the frequency:
1. Press the
Menu
button and then press
Left
/
Right
on the
Navigation Pad
to view the
SETUP
screen.
2. Press
Up/Down
on the
Navigation Pad
to select
FREQUENCE
. Press the
OK/Enter
button to
view the frequency settings.
3. Press
Left/Right
on the
Navigation Pad
to
select either
50Hz
or
60Hz
.
4. Press the
OK/Enter
button to save your
frequency settings.
5. Press the
Menu
button to exit this screen.
Setting the date and time
See “Setting the date and time”.
System requirements
The camera requires a host PC with the following specifications:
Windows® Vista, XP, 2000, ME, 98SE operating system
Intel® Pentium III 500 MHz CPU or better
At least 256 MB of RAM or higher
Standard USB 1.1 port or better
4 x speed CD-ROM drive or higher
At least 200 MB of available disk space
NOTE
•
A USB 1.1 port will enable you to transfer files to and from your host PC, but transfer
speeds will be much faster with a USB 2.0 port.