English
-42-
Symptom
Cause
Measure
The batteries are running
low.
Replace with a new set of
batteries.
The power is not on.
Turn the power on.
The camera is not in Photo
mode.
Press the
Menu
button for
two seconds to select photo
mode.
The internal memory or
memory card does not have
any free capacity.
Insert a new memory card,
or delete unwanted files.
End of memory card life.
Insert a new memory card.
The flash is recharging.
Wait until the status LED is
off.
The memory card is
unrecognized by the
camera.
Format the memory card in
this camera before its first
use or when it was used
other than this camera.
The auto power off function
is activated.
Turn the power on again.
Even if I press the
shutter button,
the camera does
not shoot.
The memory card is
write-protected.
Remove the
write-protection.
The power is not on.
Turn the power on.
Images do not
appear on the
LCD monitor.
The lens cover is not open.
Open the lens cover.
The flash does
not fire. The flash
cannot recharge.
The flash is set to off.
Press Set button to switch
to Automatic flash and
Force Flash.
The image is too
dark.
The image was captured in
a dark place while set to no
flash.
Set the flash to something
other than flash off mode.
