4
Before
fi
tting the handle, remove the protective cover from the screw-
fi
x element on the side of the pan.
During
fi
tting, take special care to see that the screws screw-in easily. If this is not the case, then the
screw is sitting at an angle to the thread. Screw out the screw and re-enter making sure the screw is
aligned with the thread. Never use force. Screws entered with force can lead to damage to the internal
thread and the handle can never be
fi
xed in position again.
Do not use a pan with a loose handle – certain danger of injury!
Attention!
Assembly
Before you can use your Cera
fi
t Ceramic Pans for the
fi
rst time, you must
fi
x the handle to the pan and the knob
onto the glass lid. Follow the instructions listed below:
Pan
Handle
Spring ring
Screws
Ceramic Pan (
Ø
28 cm)
Number 28
1 x
1 x 20 mm
Ceramic Pan (
Ø
24 cm)
Number 24
1 x
1 x 20 mm
Ceramic Pan (
Ø
20 cm)
Number 20
1 x
1 x 20 mm
Handles are numbered to correspond to the pan. Take care to
fi
nd and identify the right screw for the handle as
well as the right handle before starting assembly.
Material list for
fi
xing the right handles
Fixing the handle
Spring ring
