![background image](http://html1.mh-extra.com/html/genius/1300-dp/1300-dp_use-and-maintenance-handbook_2212658053.webp)
English
- 28 -
C 204
F 205
F 215
F 500
C 999
CPUU
AC50
Oil
All machine functions stop
All machine functions stop, except
the traction system.
All machine functions stop, except
the traction system.
The display is flashing.
The machine does not start.
The display is flashing.
The display is flashing.
The temperature of the centre
brush electronic control circuits is
very high.
The battery is flat.
The battery is flat.
The centre brush is worn.
The red key for disabling the self-
braking function has been
removed. Possible problem
affecting the cables of the traction
motor.
The waste bin is full.
Excessive power draw or centre
brush lock.
The oil in the endothermic engine
must be replaced
See remedy for code
C 104.
Recharge the battery (see the
Maintenance chapter). This code
applies to the acid battery.
See the remedy for code F 205.
This code applies to the gel battery.
Replace the brush.
Turn the machine off. Insert the red
key and turn it clockwise. Check
the cables of the traction motor.
Empty the waste bin.
Check smoothness of brush
movements and locate any
obstructions (rope,nylon,etc..)
Replace the lubricating oil in the
engine, following the instructions
given in the use and maintenance
handbook. After replacing , reset
the partial working hour meter.
Flashing display
Summary of Contents for 1300 DP
Page 67: ......