CHANGE THIS TO WHAT THE PRODUCT IS AND COPY INTO THE MASTER PAGE A
7
Power Supply Adaptor and Appearance
With a power capacity of 60 watts, the Power Supply PD4860 provides enough power for the whole VDS4020
system and the camera on the remote side.
Besides, it compensates for the power consumption caused by the DC resistance through the coaxial cable dur-
ing power transmission.
Two holding brackets and six screws come with the purchase of the power adaptor, which could be inserted into
the brackets and fastened to the desired location. For users who do not purchase the power adaptor from Biwave,
48V DC (the standard industrial voltage) power adaptor could be used. It could be obtained
from either the industrial DC power supply or Din Rail DC power supply. Just remember to add a 5.0mm spacing
plug (pluggable terminal block) to the Viewer as shown in the drawing.
Supplier Part Number: GS60A48
Electric Specifications:
AC Input: 100 ~ 240V AC
Output: 48V DC, 1.25 Amps
Power Rating: 60 watts
Physical Specifications:
Weight: 270 grams
Weight with two holding
brackets: 306 grams
Environmental Specifications:
Operating Temperature: 0 to 45°C (32 to 113°F)
Relative Humidity: 20 to 90 percent, noncondensing
Storage Temperature: -45 to 85°C (-49 to 185°F)
Fig 6. Installation of Power Supply Adaptor
