6
2.0 Overview
Security Cap
DC12V
1. Network Connector
2. Power Connector
3. Mounting Base
4. Fixed Screw
5. Micro SD Card Slot*
6. Reset*
1. Loosen the nut from the main element.
2. Run the network cable (without RJ 45 connector) through both elements. Then crimp
the cable with RJ 45 connector.
3. Connect the cable to the hermetic connector. Then tighten the nut and the main
cover.
Connecting Network Cable
Note: Micro SD card slot and reset are optional. If no such interfaces, please
skip these instructions.
•
It is recommended to install the security cap for outdoor installation.
•
If the PoE switch is used to power the camera that supports PoE power supply, DC12V
power supply is not required.
