5
Hard Disk Installation
Please follow the steps as illustrated below to install the hardware:
Take the disk tray(s) out from the
NVR.
Connect the Ethernet cable to the Gigabit
LAN port.
Install a hard disk in each tray and
secure the disk with four screws.
Ensure the disk holes match the
holes at the base of disk tray.
Connect the power cord to the power
connector.
Insert the disk tray(s) into the NVR
and push to the end.
Turn on the server and a beep indicates
the NVR is in the boot process. Wait until
the NVR beeps again – this may take a
minute or two. The NVR installation is
now complete.