background image

 

11

Starting up the laminating machine 
 
Lamination 

 

1.  Push the plug into the mains socket outlet and set the switch to ’I’. The blue 

LED (Power) lights up and the heating process will begin.  

2.  The orange LED (Ready) lights up after approximately 3 - 5 minutes. Now you 

can begin the laminating process.  

3.  Open the laminating film and lay the material that is to be laminated directly 

onto the closed side. Leave a margin of between 3 mm and 5 mm 
approximately beyond the edges while doing so. 

 

Caution 

 
a) Choose a film of correspondingly suitable size in relation to the material that is to 
be laminated respectively. 
b) It is not recommended to process several smaller materials in one film. 
c) Do not cut up the film before the laminating is done. 
d) The material that is to be laminated, is not allowed to be thicker than 0.5 mm 
including the film. 
e) It is imperative to only laminate very thin or soft materials, like newspaper or 
serviettes for example, with thicker films (100 microns). We recommend refraining 
from any attempt to do so! 
f) Do not insert any laminating film without the contents. 
g) Never utilize laminating pockets on one side or when they are rolled up. 
h) Only utilize laminating foils that are also described as such. Other kinds of film, like 
transparent wallets for example, are unsuitable for laminating! 
 
 

4.  Insert the material within the laminating film straight and with the closed side 

first into the feed opening on the machine’s front side. The material will feed it 
in automatically now. 

5.  The laminated material that emerges from the delivery opening on the 

machine’s back side is not allowed to be pulled out by force. Wait until it has 
run out of the machine completely. Let the laminated material to cool down 
briefly!  

6.  Switch off the machine after the laminating has ended, by setting the switch to 

‘O’. Let the machine cool down and always pull the plug out of the mains 
socket outlet after using the machine. 

 

 
Note: Do not feed the laminator further with foil in case of a blockage. Turn off 
the device immediately! 

 

Summary of Contents for LA 200


































Reviews: