©2010 The Genie Company
12/2010
22
ADJUSTMENT GUIDE -
SPEED SETTINGS
FOR HELP-1-800-35-GENIE OR WWW.GENIECOMPANY.COM
Speed settings are pre-programmed at the factory
for the maximum speed. Speed settings should not
need adjustment with this unit.
However, travel speed for the opener in both the
open
and
close
directions can be adjusted to slower
speeds to minimize normal wear for heavy sectional
doors.
NOTE:
One piece doors are automatically set during
Limits programming to the slowest speed and
opener speed cannot be reset for one piece doors.
CHANGE SPEED SETTING
Use this guide to ADJUST powerhead SPEED settings.
There are three (3) Speed settings available on this
unit for the
open
and
close
directions. Door type
(one piece or sectional), door weight and balance,
and condition of door components / track affect
door speed. Speed adjustment may not be available
for some installations depending on these factors.
1.
Press
PROGRAM
SET
on the powerhead and hold until both
lights turn steady ON. Release button.
Lights go out and Round BLUE light comes ON.
2.
Press
two
times and the Round BLUE and Long
BLUE lights come ON.
3.
Press
PROGRAM
SET
once to enter the Speed Programming
menu. The round LED will flash BLUE 3 times,
then the
current
Speed setting
for UP travel
will
display on the LEDs. See table below.
4.
Press to raise or to lower
UP Speed settings
within the available range.
NOTE:
Faster door speeds may not be available.
5.
Press
PROGRAM
SET
to
set
UP Speed level
. The long LED will
flash BLUE 3 times, then the
current
Speed setting
for DOWN travel
will display on the LEDs.
6.
Press to raise or to lower
DOWN Speed
settings
within the available range.
NOTE:
Faster door speeds may not be available.
7.
Press
PROGRAM
SET
to
set
DOWN Speed level.
Both LEDs flash
BLUE to confirm.
Speed Level
Powerhead LEDs
Round LED
Long LED
Default LED display is the current Speed setting
LED Speed indicator colors
Red
Red
Purple
Purple
Blue
Blue
Speed Level LED indicator colors
MAXIMUM
Red
ON
Red
ON
MID
Purple
ON
Purple
ON
SLOW
Blue
ON
Blue
ON
