Genie GTH-636, Service And Repair Manual

Page: 16 / 109

Service and Repair Manual April 2018
Specifications
6 GTH-636 Part No. 1287209GT
Deutz TD 2.9 L4 Engine
Displacement
177 cu. in
2.9 liters
Number of cylinders
4
Bore and Stroke
3.6 x 4.3 inches
92 x 110 mm
Horsepower net intermittent @
2600 rpm
74.2 hp
55 kW
Firing order 1 - 3 - 4 - 2
Standby idle 1000 rpm
Low idle 950 rpm
High idle 2600 rpm
Compression ratio
17.4:1
Compression pressure pressure (psi or bar) of the
lowest cylinder must be at least 75% of the highest
cylinder
Governor electronic
Lubrication system
Oil pressure, hot (@ 2000 rpm) 40 to 60 psi
2.8 to 4.1 bar
Oil capacity (including filter) 9.4 quarts
8.9 liters
Oil viscosity requirements
-22°F to 86°F / -30°C to 30°C 5W-30
(synthetic)
-4°F to 104°F / -20°C to 40°C 10W-40
Above 5°F / -15°C 15W-40
Unit ships with 15W-40.
Extreme operating temperatures may require the use of
alternative engine oils. For oil requirements, refer to the
Engine Operator Manual for your engine.
Oil temperature switch
Installation torque 8 - 18 ft-lbs
11 - 24 Nm
Temperature switch point 275°F
135°C
Oil Pressure switch
Installation torque 8 - 18 ft-lbs
11 - 24 Nm
Pressure switch point 20 psi
1.4 bar
Fuel injection system
Bosch
Injection pump pressure, maximum 23200 psi
1600 bar
Injector opening pressure 3046 psi
210 bar
Fuel requirement
For fuel requirements, refer to the engine Operator
Manual for your engine.
Starter motor
Current draw, normal load 400A
Battery – Engine starting and control system
Type 12V DC
Quantity 1
Battery capacity, maximum 1000A
Reserve capacity @ 25A rate 200 Minutes
Alternator output 95A @ 12V DC
Fan belt deflection 3/8 to 1/2 inch
9 to 12 mm