October 2015
50 GTH-1256 Part No.
57.0009.0662
Second Edition - First Printing
Attachments
Occupying the Platform
Do not carry materials directly on platform railing
unless approved by Genie.
Be certain that materials and tools are protected
from falling out of the platform.
Be aware of crushing
hazards when grasping
the platform guard rail.
During movement of the
platform, occupants must
keep all body parts inside
the platform railing.
Do not sit, stand or climb
on the platform guard
rails. Maintain a firm
footing on the platform
floor at all times.
Do not enter or exit the platform unless the
machine is in the stowed position and the platform
is at ground level.
Occupants shall not climb on any part of the
telehandler in attempting to enter and exit the
platform.
Do not climb down from the
platform when raised.
Do not place or attach overhanging loads to any
part of this machine or platform.
Do not place ladders or
scaffolds in the platform or
against any part of this
machine.
Do not tie the boom or platform to adjacent
structures.
Do not place loads outside the platform perimeter.
Do not transport tools and materials unless they
are evenly distributed and can be safely handled
by person(s) in the platform.
Keep the platform floor clear of debris.
Never use ladders, boxes, steps, planks or similar
items on the platform to provide additional reach.
Be certain that required personnel fall protection
devices, such as guard rails and full body harness
with lanyard, are in place and properly used.
Use the hand rails to maintain balance while the
platform is in motion.
Do not increase the surface area of the platform or
the load. Increasing the area exposed to the wind
will decrease machine stability.
