manualshive.com logo in svg

Genie GS-2668 DC, Operator'S Manual

Share
Download
Genie GS-2668 DC Operator'S Manual Download Page 40

Operator's Manual

Fifth Edition · First Printing

38

GS-2668 DC • GS-3268 DC

Part No. 133557

Transport and Lifting Instructions

Observe and Obey:

Only qualified riggers should rig and lift the

machine.

Be sure the crane capacity, loading surfaces

and straps or lines are sufficient to withstand
the machine weight. See the serial label for the
machine weight.

Lifting Instructions

Fully lower the platform. Be sure the extension
deck, controls and covers are secure. Remove all
loose items on the machine.

Determine the center of gravity of your machine
using the table and the picture on this page.

Attach the rigging only to the designated lifting
points on the machine. There are two lifting points
on each end of the machine.

Adjust the rigging to prevent damage to the
machine and to keep the machine level.

Y Axis

X Axis

Center of gravity

X Axis

Y Axis

GS-2668 DC

87.4 cm

65.5 cm

GS-3268 DC

84.6 cm

69.3 cm

Summary of Contents for GS-2668 DC













































Reviews:

No comments

Brands by name

Popular brands

Load more brands