manualshive.com logo in svg

Genie GS-2668 DC, Operator'S Manual

Share
Download
Genie GS-2668 DC Operator'S Manual Download Page 15

Operator's Manual

Fifth Edition · First Printing

Part No. 133557

GS-2668 DC • GS-3268 DC

13

  Explosion and Fire Hazards

Do not operate the machine in hazardous locations
or locations where potentially flammable or
explosive gases or particles may be present.

  Damaged Machine Hazards

Do not use a damaged or malfunctioning machine.

Conduct a thorough pre-operation inspection of the
machine and test all functions before each work
shift. Immediately tag and remove from service a
damaged or malfunctioning machine.

Be sure all maintenance has been performed as
specified in this manual and the appropriate Genie
service manual.

Be sure all decals are in place and legible.

Be sure the operator’s, safety and responsibilities
manuals are complete, legible and in the storage
container located on the platform.

  Crushing Hazards

Keep hands and limbs out of scissors.

Use common sense and planning when operating
the machine with the controller from the ground.
Maintain safe distances between the operator, the
machine and fixed objects.

Maintain a firm grasp on the platform rail when
pulling the rail pins. Do not allow the platform guard
rails to fall.

Do not work under the platform or in the scissor
links without the safety arm in place.

Work Area Safety

Summary of Contents for GS-2668 DC













































Reviews:

No comments

Brands by name

Popular brands

Load more brands