Geniewatch, NSD5451 User Manual (Ver. 1.0)
Genie Network
22
3.5
Preset
z
Function
Max. 127 positions can be stored as Preset position. The Preset number can be
assigned from 1 to 128, but 95 is reserved for starting OSD menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up
independently for each preset. Label should be blank and "Camera Adjust"
should be set to "GLOBAL" as default. All characteristics can be set up in OSD
menu.
z
Set Preset
<Set Preset> [1~128]
z
Run Preset
<Go Preset> [1~128]
z
Delete Preset
To delete Preset, use OSD menu.
3.6
Swing
z
Function
By using Swing function, you can make camera to move between 2 Preset
positions repeatedly. When swing function runs, camera moves from the preset
assigned as the 1st point to the preset assigned as the 2nd point in
CW(Clockwise) direction. Then camera moves from the preset assigned as the
2nd point to the preset assigned as the 1st point in CCW(Counterclockwise)
direction.
In case that the preset assigned as the 1st point is same as the preset assigned
as the 2nd point, camera turns on its axis by 360
°
in CW(Clockwise) direction
and then it turns on its axis by 360
°
in CCW(Counterclockwise) direction.
Speed can be set up from 1
°
/sec to 180
°
/sec.
z
Set Swing
To set Swing, use OSD menu.
z
Run Swing
Method 1) <Run Pattern> [Swing NO.+10]
Method 2) <Go Preset> [Swing NO.+140]
ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143]
z
Delete Swing
To delete Swing, use OSD menu.
1st Preset
2nd Preset
1
CW
Di
rec
tio
n
2
CC
W
Dir
ec
tio
n
