ii
Intro Section
CAUTION:
•
To reduce the risk of electric shock, do not open the camera, please consult a
professional or contact your distributor.
•
To prevent fire or shock hazards, the power, input voltage, current, voltage
polarity and operating temperature of this camera must meet the requirements
stated.
•
Please note the operating temperature and environmental requirements of
the camera and avoid too low or too high temperatures. General operating
temperature range of -10°C+50°C (Fahrenheit temperature is 14°F~122°F). Avoid
anywhere where there is flooding, rain, dust and moisture erosion that will
cause the camaera to be damaged.
•
When installing the camera, you should avoid direct sunlight and glare which
can cause damage to the sensor.
•
Do not touch the sensors surface, if you see any marks or small particles use
a cotton swab or lens paper to wipe away. If it is difficult to remove, a neutral
detergent diluted with water would be useful. Do not use any solutions that are
corrosive.
•
In order to make the camera work smoothly and obtain a satisfactory image,
the power cord and video connection can not be too long, otherwise this will
increase line loss which will lead to the inadequate magnitude of the operating
voltage or video signal of the camera.
•
In order to prevent the camera from falling, please do not place the camera
on an unstable bracket, base or other objects. It will lead to the camera being
damaged, at the same time, a possible injury.
•
The camera cannot be placed near a radiator or any heat resistor.
