User Manual
Access Control Proximity Reader with Bluetooth and Keypad
5
3. Installation
1. Open DG-800+ Keypad by loosening and removing the back case torx screw at
the bottom with the torx wrench.
2. Use the provided drilling template to accurately locate and drill the required
holes.
3. Use the screws provided to mount the back case on the wall. Be sure to draw
the wiring through the large centre hole in back case, and keep level.
4. Connect accurately the system wiring following the label enclosed on the rear
5. Put the unit back and screw it on by using the torx wrench.
Parts List