Parts removed for clarity
FIG. 9.
Connector
Detail
11. Remove control board mounting screws, slide board forward to remove from mounting clips. FIG. 9.
12. Remove three motor bolts from top of powerhead. FIG. 10.
13. Install replacement motor in reverse order.
14. Re-Install control board and all harnesses. FIG. 8.
Note:
Be certain to install all harnesses in the correct position being sure to install with locking tabs facing each other. FIG 11
.
15. Install powerhead cover to chassis. Feed antenna wire through hole in cover.
16. Reinstall rail assembly to powerhead in reverse order of step 8.
17. Reinstall opener assembly to mounting hardware and connect to door arms to carriage.
18. Reinstall door arms in reverse of step 6.
19. Install wall control and Safe-T-Beam wires.
20. Install light bulbs and lens cover(s).
21. Plug opener in.
22. Reset limits and operate opener and test all safety features and functions. Refer to your owners manual or visit www.
GenieCompany.com.
23. Install BBU, if equipped. Plug BBU harness into top of powerhead.
FIG. 10.
FIG. 11.