8. Remove rail assembly from powerhead:
•
On belt drive models, remove two screws and belt guard from rail assembly. FIG. 5.
•
Remove four rail mounting bolts and slide rail assembly off of motor shaft. FIG. 6.
9. Remove 5/16” screws securing cover to chassis. FIG. 7.
NOTE
:
Pull Antenna from cover carefully.
Antenna
Cover Plate
FIG. 5.
10. Unplug these harnesses from control board. FIG. 8.
•
Light Harness
•
Motor Wires (2)
•
Encoder Harness
•
AC In Harness
•
Transformer Primary Harness
•
Transformer Secondary Harness
•
BBU Harness if equipped
FIG. 6.
FIG. 7.
FIG. 8.
Transformer Primary. B-B
AC Line IN. B-W
Light Socket. W-BL
Transformer Secondary
R-Y-W
Motor Wire Black
Motor Wire Red
Wire color legend
W=White
G=Green
B=Black
BL=Blue
R=Red
Y=Yellow
Two Bulb Model
One Bulb Model
Encoder W-G-B-B-R-R
BBU B-R