manualshive.com logo in svg

Genie 1035, Operation & Maintenance Manual, Page: 3 / 32

Share
Download
Genie 1035 Operation & Maintenance Manual Download Page 3

3

DO NOT RETURN PRODUCT TO STORE

If you require assistance or have any questions, 
a knowledgeable Genie Service Technician is just 
a phone call away at: 
1-800-35-GENIE (1-800-354-3643) 
Or visit our website at: 

www.GenieCompany.com

Thank you for purchasing a 
Genie® brand garage door 
opener. The leader in garage door 
opener technology.

Before setting up your new garage door opener, please locate and record the model plate on the 
opener. This information will be necessary should you seek technical support via our website, 
customer support department or local servicing Genie dealer.

Model Number

:______________________________

Serial Number

:_______________________________

1 Bulb Models

2 Bulb Models

Please  take a moment to preview this manual and assembly poster 
to ensure that you have the proper tools and skill set to install a new 
garage door opener. 

Pay particular attention to all Safety Warnings, 

Cautions and Information.

 Remember, your garage door is the largest 

and heaviest moving object in your home.

START WITH ASSEMBLY POSTER THEN RETURN TO THIS MANUAL

NOTE

Keep an original or photocopy of receipt of 
opener purchase for warranty purposes. 

Summary of Contents for 1035

































Reviews:

No comments