Genie CCTV WAHD13B, User Manual, Page: 7 / 31

AHD Camera User Manual
3
* The default video output is AHD video signal. The video output can be
changed to CVBS video output by jointing the two video switch cables.
Untie the two cables to restore the video output to AHD video.

Connecting to power
2 Menu Setup
Before starting, connect the power cables and video cables. Please
make sure all the connection are correct . Plug out the power cable and then
the camera will shut down immediately.

This
c
amera must be connected to the DVR which support
s
AHD video
input. The DVR must also support
the
set menu of the camera, or the
function of menu. Different DVRs manufactured by different
companies
could
have different modes of menu operation.
Here we take 16 CH DVR for example. After starting the DVR, the
following menu tool bar will pop up by right-clicking the mouse.