Genie CCTV WAHD13B, User Manual, Page: 21 / 31

AHD Camera User Manual
17
The higher the level of the sharpness is, the clearer the outline of the image
is, but the more the noises are. Please select the level as required.
MONITOR
: LCD and CRT are selectable. Choose one type of the monitor
and click “Iris+” to set the value of GAMMA (only available for LCD
monitor), blue gain and red gain.

GAMMA: Set the value of GAMMA. USER, 0.45, 0.50, 0.50, 0.60,
0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 and 1.00 are selectable.

BLUE GAIN: Increase or decrease the value of blue.

RED GAIN: Increase or decrease the value of red.
LSC
: If ON is selected, the brightness of the edge of the image will be
compensated.
VIDEO. OUT
: PAL and NTSC are selectable.
2.9 Exit
This function includes SAVE&END, RESET and NOT SAVE. If the
parameters of the camera are out of order and the camera cannot display
images, you may choose RESET and click “Iris +” to reset all setups.
Select SAVE&END to save and exit the menu setup. The settings will not
be saved by selecting NOT SAVE.
Note: If you shut down your device but don’t exit the menu setup
interface, all settings set above will not be saved.