Genie CCTV Rapport mini, Manual

Page: 16 / 20

PTZ OSD clear
PTZ NTSC
PTZ NTSC
TELE
OSD
TELE
OSD
FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
MODE SET
FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
MODE SET
PTZ NTSC
PTZ NTSC
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
MODE GO
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
MODE SETUP
MAIN MENU
DOME
CAMERA
MOTION
DISPLAY
CLEAR DATA
EXIT
SPD
15
GPST
001
SPST
001
FUNC
01
MENU
MODE SHIFT SETUP
PTZ ADDR :001
PROTOCOL : (01)PELCO-D
BAUDRATE: 2 . 4Kbps
PARITY : NONE
MODE SHIFT SETUP
DATA RCV NTSC
METER VIDEO PTZ DATA SETUP COLOR
0101
VIDEO
Tx- Tx+ Rx- Rx+
VIDEO
IN
RX-
RX+
TX-
TX+
FUNCTIONAL SPECIFICATION FUNCTIONAL SPECIFICATION
MENU :
Activates the PTZ camera’s internal menu. PTZ cameras have an on-screen menu
system that allows Rapport mini to program various functions of the camera including
day/night mode, focus settings, and tours. When a tour is programmed into the camera it
can be activated with Rapport mini using the TOUR function in the menu.
MODE :
Change the menu.
SETUP :
Setup the PTZ Camera menu.
OSD Clear :
When you press button in the PTZ mode, the PTZ OSD clear button is
activated and press the button, the PTZ OSD is cleared.
DATA :
When you want to know the input signal of an exterior controller, you can see the input
data(HEX value) by connecting the communications cable to the RX terminal of the
Rapport mini. The control commands from the keyboard of an external controller are
displayed on the screen. Most important is that the communication speed are matched.
30
MULTI FUNCTION CCTV TESTER
31
MULTI FUNCTION CCTV TESTER