Genie CCTV Rapport mini, Manual

Page: 12 / 20

METER VIDEO PTZ DATA SETUP
COLOR
0101
METER
DC Ω
AC VOLT
ACV 0.042V
METER
AC Ω
DC VOLT
DCV+ 00.1mV
MODE STORE
[ Select Multimeter Mode ] [ Multimeter Mode ]
METER
DC Ω
AC VOLT
DCV+ 12.01V
DCV+ 12.02V
MODE STORE
①
④
⑥
⑦
⑧
②
③
⑤
⑨
Button for Multimeter mode
FAR
OPEN
TELE
OSD
NEAR
CLOSE
WIDE
MODE SET
① ②
③
V
~
~♬
①
Voltage mode
②
OHM(resistance) mode
③
AC/DC, resistance/ continuity
제품소개
FUNCTIONAL SPECIFICATION
FUNCTIONAL SPECIFICATION
Digital Multimeter
Voltage, resistance and continuity can be tested.
To prevent electric shocks, injury, or damage to the Rapport mini, disconnect
the power supply to the circuit under test, and discharge all high-voltage capacitors
before testing resistance and continuity.
When using the meter function of the Rapport mini, make sure the unit is
switched on and set to the appropriate test mode before connecting the test lead
set to the circuit under test.
W A R N I N G
Press the button to go into the multi meter mode.
Setup Keys
METER
※
Sleep time is not operated in Multimeter mode.
(Sleep function -> see 34 page)
①
METER : Indicates current mode.
②
Indicates remaining battery.
③
Indicates type of test set up :Resistance test, Continuity test, DC & AC Voltage.
④
Indicates test mode : DCV > DC Voltage, ACV > AC Voltage, OHM> Resistance
BUZZ> Continuity
Indicates test value displayed : Resistance ( Ω , k Ω , M Ω ), voltage( V, mV), continuity(BUZZ)
⑤
⑦
Indicates measured value on hold :
The measure value is stored and displayed here when the SET key is pressed .
⑨
Indicates Store button by using SET button.
⑧
Indicates mode display : Digital multimeter mode is displayed.
⑥
Indicates measured graph value :
The Measured Input value is displayed in the form of a graph.
The graph is changed automatically and is equal to the measured value.
OVER is displayed when the measured value is higher than the setup value.
( : DC Adaptor connected : Operated by Battery)
22
MULTI FUNCTION CCTV TESTER
23
MULTI FUNCTION CCTV TESTER