Genie CCTV HDVRQ Series User Manual Download Page 9

Page: 9 / 64

This DVR provide superior video image quality on Live view and Playback.

• Pentaplex Operation Performance (Live, Recording, Playback, Backup, Network)

• Up to maximum 16 channel composite input ports depending on model.

• Various Recording mode. (Manual / Schedule / Event)

• Various Search functions. (Date/Hour search, Calendar search, Event Search)

• Various Playback functions. (Normal / Fast / Slow / Step / Reverse / Smart / Panorama / Repeat)

• Overwrite Recording function.

2. OUTLINE

2.1 Functions

• The DVR menu structure and on screen display is presented in a simple to use and logical GUI format.

• Support 16channel Audio.

• Support Mouse control.

• E-mail function (Alarm, Motion detection, Video loss, HDD fail and etc.)

Summary of Contents for HDVRQ Series

































































Search results

Summary of Contents for HDVRQ Series

Reviews:

Related manuals for HDVRQ Series

Brands by name

Popular brands

Genie CCTV HDVRQ Series, User Manual

Search results

Summary of Contents for HDVRQ Series

Reviews:

Related manuals for HDVRQ Series

Brands by name

Popular brands