GENI SRM-6113 User Manual Download Page 2

 

INTRODUCTION                                                                                                           

Thanks for your purchase of our product, SRM-6113 High Power LED Moving Head. It can works under 

auto mode

sound and Master Slave mode with 16 built-in programs. The product has a long lifespan and 

10W 4IN1 cree LED. It is exquisite and applicable for all kinds of entertaining occasions. Before you begin, 

please read instructions carefully. If you meet with any problem, please contact with your distributor nearby. 

 

MAIN FEATURES 

DMX-512 control, 12 channels 

DMX, AUTO, SOUND

Master Slave mode 

RGBW control with 255 grades 

RGBW total dimmer is 0~100% 

Shutter speed is 10/sec ~1/10secs 

9X10W 4IN1 RGBW LED 

PAN scan angle 0~540 degrees

 

Tilt scan angle 0~230

 

degrees 

UNPACKING 

SRM

-6113 High Power LED Moving Head 

USER MANUAL

 

TENICAL SPECIFICATION 

Type--------------------------------------------------------------------------SRM-6113 High Power LED MOVING HEAD 
Light Source--------------------------------------------------------------------------------9X10W 4IN1 RGBW CREE LED 
Voltage----------------------------------------------------------------------------------------------------96~240VAC 50/60Hz 
Power----------------------------------------------------------------------------------------------------------------------------110W

 

Dimension------------------------------------------------------------------------------------------------------250X300X390MM 
Weight-------------------------------------------------------------------------------------------------------------------------6.45KG 
 

SAFETY WARNING

 

For your convenient and accurate operation, please read following information carefully

Suitable for indoor use only.

 

Put it in a dry, well 

-ventilated place in case of short cut caused by erosion of moisture and rain. 

Do not install it nearby hot sources in case that rising temperature of lamp damages itself.

 

Do not barrier vent in order to ventilate well and dissipate in time.

 

Connect the fixture with power source, which has a ground 

line and voltage of power source, should accord 

with rating voltage. 

Page 13 of 18 

Reviews: