SRL-6005 PAR LAMP
Installation
SRL-6005 comes equipped with a yoke for hanging installations. The yoke will provide for
a static mount or installation. It is important never to obstruct the fan or vents pathway.
Mount the fixture using the safety hook. Adjust the angle of the fixture by loosening both
knobs and tilting the fixture. After finding the desired position, retighten both knobs.
Never mount in places where the fixture will be exposed to rain, high humidity, extreme
temperature changes or restricted ventilation.
Operation Instruction
Rear Panel
Fuse Replacement
Note:
Replace the fuse with the same specified. If not, the potential damage will be
avoided of the company’s responsibility.
Replace the fuse
：
Disconnect the power, use the screwdriver to unscrew the fuse
holder, take out the fuse, place it with the good one of the same specified
and finally screw the fuse tight.
4
