Page 7 of 38
Environment
Requirement
When installing Purifier 32, avoid placing it in the places where
there is a lot of dust, vibration, strong magnetic field, direct sunlight
or ultraviolet radiation, airflow, high humidity or high temperature
fluctuation. Please place the instrument on a regular experiment
table to ensure that:
⚫
The working area is flat, dry, clean and secure, with extra
space for accessories, cables, reagent bottles, etc;
⚫
At least 10 cm of free space is provided for ventilation on the
table around the instrument;
⚫
The ambient air is clean, free from corrosive steam, smoke
and dust;
⚫
Ambient temperatures range from 10°C to 40°C;
⚫
Humidity is low and condensation does not occur (relative
humidity is below 80%);
Care should be taken not to operate the instrument in an
environment with potentially harmful liquids or gases.
Precautions
and
Restrictions
⚫
Always ensure that the laboratory power supply voltage meets
the specification on the label on the back of the instrument
(Figure 2-2);
⚫
Do not smoke or eat or drink while using this device;
⚫
Clean hands thoroughly after handling the buffer solution;
⚫
Follow regular laboratory procedures for handling samples
that may be dangerous;
⚫
Adhere to good laboratory practices and wear appropriate
protective clothing such as disposable gloves and laboratory
coat;
⚫
Ensure that the working area is well ventilated;