Remove dust cap
1. Take the FiberTwist P6426/G6426 out of the box.
2. The dust cap is connected to the red string
located on the rear of the FiberTwist P6426/G6426.
3. Remove the dust cap by pulling the red string.
4. Store the dust cap in a safe place.
Twist!
1. Place the FiberTwist P6426/G6426 on the FTU/Bracket as shown in the picture below.
2. Rotate clockwise until it clicks into place.
3. Make sure the FiberTwist P6426/G6426 is aligned squarely on the FTU/Bracket.
Your FiberTwist P6426/G6426 is now installed!
