Genexis FiberTwist G6426 Installation Manual Download Page 2

FiberTwist P6426/G6426 is installed on an FTU/Bracket

Box contents

Check if the following items are in 
the giftbox: 
•  Genexis FiberTwist P6426/G6426 
•  Power adapter 
•  Labels (self-adhesive)

 
Label position

The product label is positioned on the bottom 
of the active device. The relevant device 
information is also listed on the additional 
labels included in the giftbox.

Preparation 

Ensure there is a power socket 
within reach of where the device 
is being installed.

Important:

 Instructions need to be 

followed precisely and uninterrupted.  
This minimizes the risk of damage (a 
severe degradation of signal quality)  
to the fiber optic connectors.

Warning: 

Do not cover the device with 

anything, this will interfere with the 
ventilation of the FiberTwist.  
Operation Temperature 0°C ~ 40°C

Various translations of this document (if available) and additional product information can be 
found on 

https://genexis.eu/product/fibertwist/downloads

Installation guide

Remove Blind Cover or active device (if present)

1.  Press and hold the unlock button (on the right side of the Blind Cover or active device).
2.  Rotate the Blind Cover or active device counterclockwise till it blocks.
3.  Remove the Blind Cover or active device from the baseplate (FTU) by pulling 

it towards yourself.

4.  Store the Blind Cover or active device in a safe place.

Summary of Contents for FiberTwist G6426










Reviews: