Attach feeder fiber
• If using ingress ports 1 or 2, insert the zip
ties through the appropriate set of holes.
• Strip the outer sheath off the feeder fiber.
• If required, install a gasblocker. The
gasblocker should rest in the recess.
• Peel the backing off the foam padding
before wrapping it around the base of the
feeder fiber.
• Position the feeder fiber in the FMU and
secure in place using the zip ties. Trim the
excess ends off the zip ties.
Splice fiber(s)
• Place the appropriate splice holder.
• Splice the feeder fiber and pigtail together
• Place the splice in the splice holder.
• Store the overlength fiber in the FMU.
• Perform any tests required to guarantee the quality of the splice.
