In the box
Baseplate
Transparent demarcation cover
warranty seal
splice
holders
cover
screw
wall plugs
& screws
adhesive
foam
zip ties
Installation guide
Choose configuration
• Choose one of the three ingress ports to use for the feeder fiber.
• If using ingress port 1 or 2, if using ingress 1 please cut out the oblong in
the baseplate. The oblong for ingress 2 this is already cut out by default.
• For a patch-out, cut out the rectangle at the bottom of the baseplate.
• Insert 2 zip ties in the set of holes matching your chosen configuration.
Ingress 1
Ingress 2
Ingress 3
Fiber Management Unit
(FMU) with coupler
Patch-out
