background image

8

9

 ACITY (AUTO CITY) SPEED:   Automatically adjusts sensitivity to your 

speed. E.g. When set to 30 50, the detector 

will not notify you of any signal at speeds of 

less than 30 km/h, at speeds of 30-50 km/h, 

the detector will notify you according to the 

ACITY setting, and when driving at speeds 

over 50 km/h, the detector will automatically 

notify you with maximum sensitivity. When 

driving below the set speed, the detector 

will not warn of radars.

 

MIN SPEED:    OFF/10-130KM/H - Sets the minimum speed 

at which the detector starts to alert on ra-

dars. E.g. when set to 20KM/H, the detector 

will only start to warn when this speed is 

exceeded. 

FRONT ANTENNA SETTINGS:

 

REAR ANTENNA SETTINGS:

 

 
The following settings apply separately  

to the front and rear radar antennas (if used)

 

 

K BAND:  ON/OFF

 

K FILTER:  NORMAL/HIGH/OFF

 

KA BAND:   NARROW –  Narrowed Ka-band for more  specific 

band setup and fewer false alerts. 

 

  WIDE – enables detection of the whole Ka band.   

 

  OFF – disables Ka-band detection.

 

KA BAND 34.0:  ON/OFF

 

KA BAND 34.3:  ON/OFF

 

KA BAND 34.7:  ON/OFF

 

KA BAND 35.5:  ON/OFF

 

KA FILTER:  NORMAL/HIGH/OFF

 

MR CT:  WIDE/NARROW/OFF

 

MR CD:  WIDE/NARROW/OFF

 

GATSO RT3:  ON/OFF

 

GATSO RT4:  ON/OFF

 

MR FILTER:   LOW/HIGH/OFF - This function filters out false 

alerts of cars that use a blind-spot assistant 

or adaptive cruise control. When the MR Filter 

function is active, detector sensitivity to MR CT/

CD radars is slightly reduced.

New Firmware updates add detections of new types of radars, all 

supported radars, recommended settings and more information can be 

found at genevo.com/radars.

LASER PROTECTION SETTINGS:

 
 

LASER DETECTION:   ON/OFF 

Selecting “ON” opens additional settings of the 

optional laser accessory.

  LASER PROTECTION:  Allows selection of attachable laser protection:

 

  LTF -  LaserTrack Flare

 

  ALP - AntiLaser Priority

 

  FF -   GENEVO FF

 

  OFF - No laser accessory

 

PARKING ASSIST:  ON/OFF (When selected LTF/ALP/FF)

 

PROTECTION:   OFF/DETECT ONLY/0-9S/UNLIMITED 

Sets the protection time of the optional laser ac-

cessory. With the “DETECT ONLY” option you will 

be only informed about laser measurement by 

connected laser accessory or by the PRO II radar 

antenna if no accessory is connected.

 

LASER NAME:  OFF/NO VOICE/VOICE (When selected ALP/LTF)

GPS POINTS ALERTS:

 
 

ALERT DISTANCE:   250m / 350m / 450m (setting the distance of sta-

tionary speed cameras, section speed cameras, 

dangerous spots and your own GPS points). Red-

light cams are set at 250m.

 

OVERSPEED:   -10 km/h to +10 km/h (setting of possible 

speeding without warning).

 

SPEEDCAM: ON/OFF

 

AVERAGE SPEEDCAM: ON/OFF

 

RED-LIGHT CAM: ON/OFF

 

DANGEROUS SPOT: ON/OFF

 

USER AREA:  ON/OFF

LOCKOUT THE FALSE 

 

ALERT LOCATION:   During an alert, by long pressing any button, 

suppress the false alert location.

 

ADD YOUR OWN 

 

GPS POINT:   Long press any button to  

add your own GPS point.

Summary of Contents for PRO II










Reviews: