17
After a few minutes of inactivity, the device will automatically turn itself off to save
battery.
What is the pin for a Bluetooth connection?
The PIN is 0000 (four zeros). Not all computers or mobile phones require a pin
code during initial set-up (pairing ).
I have an unreliable connection via Bluetooth and there are dropouts.
• Move the mobile phone closer to the TOURING/S+.
• Move or turn off other wireless devices that can disturb a Bluetooth connection
(for example Wi-Fi, other mobile phones etc).
How do I know if the battery is charging?
A small dot on the lower right of the display will turn on if the battery is being
charged.
When the charger is being connected the display will also show “CHARGE”.
How can I check the battery charge?
A dot on the lower right corner of the display shows the battery status:
• OFF: battery fully charged.
• Blinking: battery is low.
When the battery is low, the volume will automatically be limited to 50. The unit
can still play music for some minutes.
If the battery is empty, the display will show “LOW BATT” and TOURING/S+ will
automatically turn off.
Display shows ‘NO DAB SERVICE’ or ‘NO DAB SIGNAL’
Extend the antenna. You may have to experiment different positions to find the
best reception. Positions higher up or nearer windows may improve reception.
RT
More information, troubleshooting, etc.
Select “Support” at www.genevalab.com.
Service and repair
If the product is damaged and needs repair, please contact your dealer. Visit
www.genevalab.com to find a dealer in your area.
Warranty
See the specific terms for your country at www.genevalab.com.
ING/S+.
NOTE: to force Bluetooth pairing, press the button on the back of Touring S/+
Playing music
Most mobile phones will connect automatically to the TOURING/S+ after initial
set-up (“pairing”).
1. Be sure the Bluetooth setting on your mobile phone is ON.
2. Press the
key. The display will show “BLUE”, then will show
“SEARCH”, as blinking.
3. After a few seconds, TOURING/S+ will automatically connect to your mobile
phone. The display will show “CONNECT”.
4. Play music on the mobile phone and the music will start playing on the TOUR-
ING/S+ automatically after a few seconds.
TROUBLESHOOTING
Why is my mobile phone not connecting?
You will find more detailed information on various mobile phones on our support
pages at www.genevalab.com.
The TOURING/S+ will not turn on, and the display shows “LOW BATT”.
The battery is low on charge.
Connect the power adapter to the TOURING/S+ and the battery will begin charg-
ing. You can use the TOURING/S+ while the charger is connected.
The TOURING/S+ will not turn on, and nothing happens.
If the battery is very low, there will not be enough power to even turn on the
display. TOURING/S+ can be turned on after it has been connected for a short
while to the power adapter.
Why is the TOURING/S+ turning off after a while?
