background image

18-1522-22 Rev Oct 2011

lafayetteinteriorfashions.com

Hold-Down Brackets

•  Lower the shade and place the pin from the hold-down bracket into the hole in the 

end of the slat or end cap.

•  Mark the bracket hole locations. 

•  Check that the brackets are level and aligned. Attach using two screws provided. 

•  Tilt the bottom of the shade to insert into the hold-down.

Care and Cleaning

Regular vacuuming with a soft bristle attachment will maintain a like-new appearance for most cloth fabrics. 

Wiping with cold water and a mild detergent will take care of most vinyl fabrics. 

Summary of Contents for Season Vue Shades

Page 1: ... Not Provided Inside Mount Outside Mount Ceiling Mount Standard Roll Material comes off the backside of the roller Reverse Roll Material comes off the front of the roller Install brackets against a flat surface with the screws provided Use wall anchors not provided if installing into drywall Make sure the brackets are mounted level or the shade will roll crooked Insert pin on right side of shade i...

Page 2: ...ts Unroll shade about 18 and replace in brackets Repeat until proper tension is reached SHADE DOES NOT ROLL STRAIGHT All shades are hung and inspected in the factory to ensure a straight roll All spring roller shades should be pulled from the center of the bottom of the shade Pulling the shade from the sides can cause the shade to roll crooked and possible damage the material Masking tape used on ...

Page 3: ...her end to Eyelet When using a Higbee Button make a knot in the other end and push the pin through the knot when attaching to the wood slat Urn Cord Weight Insert cord through Urn and make a knot Tie other end to Eyelet When using a Higbee Button make a knot in the other end and push the pin through the knot when attaching to the wood slat Metal Pull Screw into center of hem line through the wood ...

Page 4: ...cap Mark the bracket hole locations Check that the brackets are level and aligned Attach using two screws provided Tilt the bottom of the shade to insert into the hold down Care and Cleaning Regular vacuuming with a soft bristle attachment will maintain a like new appearance for most cloth fabrics Wiping with cold water and a mild detergent will take care of most vinyl fabrics ...

Reviews: