Genesis resource pro, Owner'S Manual

Page: 23 / 72

23
Resource Pro
FT
ENTERING SETTINGS
The Set Mode allows you to set, or verify, Units of Measure (Imperial or Metric), 12/24 Hour
Format, Time of Day, and Wet Contact Activation On/Off.
• Time must be reset when the Battery is removed for more than 8 seconds.
NOTE: While in Set Mode, the unit will revert to the Surface Sequence if
there is no button action for 2 minutes.
TO ACCESS SET MODE AND ENTER SETTINGS
While the unit is scrolling through the Surface Sequence -
• Press and hold the button down for 2 seconds, releasing it when the Set Units screen ap-
pears. F (or C) and FT (or M) will be displayed flashing (Fig. 12).
• Momentarily press and release the button (< 2 seconds) to toggle between Imperial and
Metric Units of Measure.
• Press and hold the button down for 4 seconds to save the selection, releasing it when the
Set Hour Format screen appears. During the 4 seconds a screen displaying the graphic
EA will appear momentarily and be bypassed.
• Although within the Set Mode Sequence, the EA feature is not a setting and has no user
function. It is used only by the factory to facilitate calibration.
• Hr and 12 (or 24) will be displayed with 12 (or 24) flashing (Fig. 13).
• Momentarily press and release the button (< 2 seconds) to toggle between 12 and 24.
Fig. 13 - Set Hour Format
Fig. 12 - Set Units of Measure
N