© 2021 Genesis Attachments, LLC
Genesis GRX 43
Blade, tooth, pocket and blade seat maintenance greatly affects performance. To maximize
performance and optimize the life of replaceable parts, follow all instructions for checks,
adjustments and maintenance described in this section, at the intervals listed in the maintenance
schedule in this manual.
Before performing maintenance, read, fully understand and follow these safety rules.
Wear personal safety equipment including gloves, safety glasses, safety boots and proper
clothing.
Safe blade maintenance requires two people - one to steady the blade while the other loosens the
bolts.
Blades are heavy and may fall out of the blade seat if not adequately supported. Bystanders must
stand clear.
Never strike a blade with a hardened steel tool. The blade may fragment, creating sharp flying
debris.
Pulverizing Teeth
As teeth become worn, they need to be rotated, built-up or replaced. To help customers determine
and monitor how far processor teeth have worn from their original shape, Genesis has tooth build-
up templates available.
Each template is sized and formed to that tooth’s original shape and features three lines that
indicate wear level. Simply place the template over the tooth to determine the amount of wear and
build-up required or if replacement is needed.
See the following page for part numbers, and contact your local Genesis dealer or the Genesis
Parts Department to order.
CRACKER & PULVERIZER JAW SET MAINTENANCE
Line 1
1/2 inch wear - schedule maintenance to flip or rotate in jaw
Line 2
1 inch wear - flip, rotate in jaw or build up
Line 3
11/2 inch wear - replace, if all points are worn on flippable teeth
Line 1
Line 3
Line 2
