© 2016 Genesis Attachments, LLC
Genesis GXP Jaw Armor 17
SET-UP AND TACK PROCEDURE
Lower Guide Side and Guide Blade Seat
Set
Item 2
onto the lower guide side and hold the offset dimension
(See Figure 17b)
. Clamp down
flush with the profile and tack weld into position. Set
Item 5
onto the guide blade seat and hold
the offset dimension
(See Figures 17a and b).
Clamp down and tack weld into position.
Extend welds 1.50”
past the Jaw Armor.
Then grind weld ends
smooth and taper to
parent metal.
No Weld
2
5
A
D
Figure 17a
Figure 17c
Figure 17b
Figure 17d
A
(
A
A
2
5
D
