background image

  7

PRECAUTIONS

 

 

1.

  Unplug the monitor from the power source when you clean the monitor. Do 

not use liquid cleaners or aerosol cleaners. Use a cloth to clean it. If that 
doesn’t do, please use LCD screen cleaners. 

2.

  Do not use attachments not recommended as they may cause hazards. 

3.

  Please grasp the plug to unplug the connector from the wall outlet. Do not pull 

the power cord to unplug it. 

4.

  Do not place anything on the power cord or step on it 

5.

  Do not place the monitor near water such as bathtub, washbowl, sink, laundry 

tub, swimming pool etc. 

6.

  The slots are designed for ventilation they keep the monitor both workable 

and protect it from overheating. For the same reason, please do not place the 
monitor on a bed, sofa, carpets or other similar surface. Do not place the 
monitor near or over a heat source, or place in a enclosed structure/area. 

7.

  Keep the monitor at least 2 inches (5 cm) away from the wall or other goods. 

8.

  This monitor can only use the power source indicated on the label. If you 

have questions, please consult your dealer. 

9.

  As a safety measure, this monitor is equipped with a three-wire ground style 

plug. If you can not insert the plug into outlet, contact your electrician to install 
the correct outlet, or use an adapter to ground the appliance safely. Do not 
bypass the safety purpose of the grounding-type plug. 

10.

 Please make sure that the outlet and power cord can support the total 

electricity use of the products. 

11.

  Place the monitor in safe place where the cord will not be easily tripped over. 

12.

  Follow all the warnings and instructions illustrated in the manual. 

13.

  Don’t overload the wall outlets and extension cords as this can result in fire or 

electric shocks. 

14.

 Do not remove or open the cover to service this monitor yourself. It may 

expose you to dangerous voltage or other hazards. Please refer all servicing 
to qualified service personnel. 

15.

 Unplug this monitor from the outlet and refer servicing to qualified service 

personnel under the following conditions.   

A. 

The power cord is frayed or damaged. 

B. 

The monitor has been dropped or the cabinet has been damaged 

C.  When the monitor displays a distinct change in performance, this 

indicates a need for service.   

16.

  The power cord is the main device to disconnect the power. 

17.

  Unplug the power cord when you do not use the monitor for a long time. 

18.

 Place the monitor in a well ventilated area and protect it from strong light, 

overheating and moisture. 

19.

  This monitor must be stored in a room in between the temperature of –20°C ~ 

+55°C. Storing outside this range may cause permanent damage. 

Summary of Contents for GT170M



















Reviews: