24
Item Description
Mask Mouse Selection
Switch between “select” and “deselect” for cursor-dragging function
All Area Detection
Select entire screen as detection area.
Mask All Area
Deselect entire detection area.
Continue
Continue setup
Exit & Save
Save setup and leave
Exit & Discard
Cancel setup and leave
4-2.2 SENSOR SETUP
Item Description
Sensor Popup
Check the box to Enable/Disabl e po pup scre en function for all
channels. When Sen sor is dete cted i n LIVE mode, the detect ed
channel image will pop up in full screen display.
All Off
Set all sensor off
All Low
Set all sensor polarity low
All High
Set all sensor polarity high
Sensor Polarity
Click or pr ess
▼
to select betwee n HIGH, LO W
voltage for
triggering sensor dete ction or OFF to turn of f polarity for each
channel
Low
Polarity
：
Sensor ha s not been t riggered. Wh en con nected,
sensor will be turned on..
High
Polarity
：
Sensor has been triggered. When connected, sensor
status will be turned off..
Off
：
Sensor is deactivated, and will not be turned on/off.
Note
：
4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
