Genesis CCTV BC-540WDR, User Manual

Page: 10 / 36

10
1. Mounting a lens
Remove the lens mount cap from the camera
Attach the lens to the mount. Secure it so that it does not become loose
- C Mount lens : Turn the adaptor ring to counterclockwise.
- CS Mount lens : Turn the adaptor ring to clockwise.
If the lens has an auto-IRIS mechanism, connect the lens connector.
- When installing a Video-IRIS lens, lens switch should be set to VIDEO
position.
- When installing a DC IRIS lens, lens switch should be set to DC
position.
2. Adjusting Auto-IRIS Lenses
Make this adjustment after connecting the camera to a power source and a monitor.
Set AGC mode to off.
When using a Video type lens : Adjust the level on the lens to produce minimum smear and optimum
pictures.
When using a DC type lens : Adjust the video level on the rear panel to produce minimum smear and
optimum pictures.
Set AGC mode to on. It is recommended that AGC be used in the “on” mode after adjusting the video level.