49
Englis
h
4
Press the engine's ignition switch to "START", release once the engine has
started.
It is normal that during the first startup of the machine, or if it has not been
started for a long time, requires more than one try.
NOTE:
IF the engine does not start up within 3 or 4 seconds, release the
ignition switch and wait for a few seconds before trying again to avoid
overheating the ignition switch.
During the first commissioning of the machine the battery's charge may be low if
stored for too long. If the charge is not sufficient, start up the equipment
manually (check point 5.1 of this manual) the battery is recharged automatically
while the generator is running.
4
Once the engine is started wait for a few seconds and then place the choke in
air intake open (as picture). The engine will begin working stably and is ready to
have equipment plugged in.
TART
