GK330 21
Note: It is not possible to assign separate and inde-
pendent MIDI channels to the voices and accompani-
ment sections.
MIDI
The MIDI section consists of two functions, TX and RX, which allow you to set the
Transmission (TX) and Reception (RX) channels independently for the keyboard as
a whole. Both Reception and Transmission channels also feature a Control Change
filter (on/off).
Midi channel selection
You can set the MIDI Transmission and Reception channels to any value from 1 -16,
or OFF.
If you press the MIDI [TX] button, the display will show the factory-set MIDI Trans-
mission channel.
If you press the MIDI [RX] button, the display will show the factory-set MIDI Recep-
tion setting (in this case All channels.
Use the [+] button of the numeric keypad to increase the Transmission or Reception
channel, or the [–] button to decrease it.
Control Change filter
To set the Control Change filter for either the Transmission (TX) or Reception (RX)
channel, press the [TX] or [RX] button twice. The display will show the current
setting (Off).
To activate (On) or deactivate (Off) the filter, use the [+]/[–] buttons of the numeric
keypad.
Summary of Contents for GK 330
Page 1: ...Owner s manual ENGLISH ...
Page 29: ...GK310 A 1 Appendix ...
