General GSE-109, Instruction Manual

Page: 3 / 19

If you experience any problems with the installation or
operation of your GSE-109, GSE-110 or GSE-112
slicer, contact your local The Legacy Companies
Authorized Service Agency . You can also contact TLC
Technical Service at anytime to find your local servicer
or visit our website for more details
Please fill in the information below and have it handy
when calling your authorized service agency for assis-
tance. The serial number is on the specification plate
located on the rear of the unit.
Purchased From:
Date of Purchase:
Model No.:
Serial No.:
Mfg. No.:
Refer to the service agency directory and fill in the
information below:
Authorized Service Agency
Name:
Phone No.:
Address:
When having your quality General product serviced
please use only genuine General replacement parts.
Use of replacement parts other than those supplied by
the manufacturer will void the warranty. Your
Authorized Service Agency has access to a complete
supply of parts for this unit.
You may also contact TLC at
1-877-368-2797 if you
have trouble locating your local authorized service
agency.
GSE-109-110-112 SLICER
2 P/N GENSLICERMAN
RevA 10-2011
• GSE-109 is equipped with a 110 Watt, motor that
is completely enclosed, permanently lubricated
and thermally protected motor
• Cut Capacity: 7.5” x 5” (191mm x 127mm)
• Cut Thickness: 9/16” (143mm)
• Knife Diameter: 9” (229mm)
• Dimensions: 16” W x 18” D x 15” H
(406mm W x 457mm D x 381mm H)
• GSE-110 is equipped with a 120 Watt, motor that
is completely enclosed, permanently lubricated
and thermally protected motor
• Cut Capacity: 8” x 6.5” (203mm x 165mm)
• Cut Thickness: 9/16” (143mm)
• Knife Diameter: 10” (254mm)
• Dimensions: 17” W x 21” D x 15” H
(432mm W x 533mm D x 381mm H)
OWNER INFORMATION
(CONTINUED)
• GENERAL’s all purpose slicers use a solid all
stainless steel belt driven drive shaft powered by
powerful 115 Volt motor.
• Aluminum die cast base finished in a silver epoxy
powder coating with an added anti-microbrial fin-
ish for easy cleaning and sanitizing
• Stainless steel ball bearings for long lasting quiet
use.
• Safety interlock switch to prevent harm when
cleaning and removing the knife.
• Safety gard edge around the knife to help prevent
injury
• Strong, reliable, moisture resistant switches pro-
vide for continuous operation.
• Motor overload switches
• The GSE-109, GSE-110 and GSE-112 utilize a
six foot, NEMA 5-15P, 120 volt insulated power
cord for use in a standard 5-15R, 15 amp power
receptacle
GENERAL PRODUCT INFORMATION
SERVICE/TECHNICAL ASSISTANCE
GENERAL FEATURES