14
Warranty
1.
Our warranty provides the correction of
deficiencies to the tool once verified by an
authorised service centre that the deficiencies
were caused by a manufacturing fault within
the warranty period.
2.
The standard warranty period is 3 years from
the date of purchase. The warranty period can
be extended to 7 years upon registration of the
tool within 30 days of purchase.
3.
The warranty does not cover:
a) Calibrations and components that are
subject to wear and tear.
b) Defects in the tool caused by
non-compliance with the operation
instructions, improper use, abnormal
environmental conditions, inappropriate
operating conditions or insufficient
maintenance.
c) Defects caused by using accessories or spare
parts other than approved parts.
d) Services or repairs carried out by
non-authorised persons.
4.
Defects recognised by an authorised service
centre as being covered by the warranty shall
be corrected either by repair or replacement
of the tool.
5.
The warranty claim must be lodged within the
warranty period. This requires the complete
tool with the original sales receipt containing
the purchase date and place of purchase.
Partial or disassembled tools cannot be
submitted for a warranty claim.
This tool comes with a standard 3 year warranty. Extend the warranty of your
laser level to 7 years by registering online. See website for terms and conditions.
All Spot-on measurement tools are carefully checked and tested to our precise quality assurance standards.
We offer a warranty in accordance with the following conditions:
www.spoton.com.au/warranty-information
6.
Services provided under warranty do not
lengthen or renew the warranty of the tool.
“Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for
a major failure and for compensation for any
other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major
failure.”
For more information please visit
www.consumerlaw.gov.au
3 YEAR STANDARD WARRANTY PERIOD
1.
The warranty period for your tool is 3 years
from the date of purchase.
2.
The warranty period for batteries, battery
packs and chargers is 1 year from the date of
purchase.
3.
Calibrations are not covered under warranty as
they are deemed wear and tear.
4.
All products have a standard warranty period,
you do not have to register your products to
obtain the standard warranty period.
5.
To claim under this warranty, the date of
purchase of the tool must be documented by
an invoice/receipt.
