11
Using the Detector (continued)
FIGURE 2
FIGURE 3
FIGURE 4
DETECTOR OPERATION
•
Power the detector on by pressing the power
button. The LCD screen will turn on and the speaker
will emit a small tone to indicate the detector is
operating.
•
The LCD screen will display the battery
level,detection mode and speaker function.
•
To change between broad, coarse and fine mode
press the detection mode button.
•
To change the speaker volume or turn the speaker
off, press the speaker button.
•
To turn on the backlight, hold down the mode
button for approximately 3 seconds.
•
Move the detector into the path of the laser beam.
•
Hold the detector upright for horizontal beams
(Fig. 2) or rotate 90° for vertical beams (Fig.3).
•
The direction arrows or level line on the LCD screen
will indicate the position of the laser beam. A
digital increment display will indicate the position
of the laser beam (Fig. 2 & 3). The detector will emit
a constant beep once the level position has been
located (Fig. 4).
