General 90-170B M1, Setup & Operation Manual, Page: 8 / 32

LIST OF CONTENTS
Once the parts have been removed from the packag-
ing, you should have the following items:
QTY
A- BANDSAW
(NOT SHOWN)
. . . . . . . . . . . . . . . . . . . . . . .1
B- TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
C- TABLE LOCK KNOB . . . . . . . . . . . . . . . . . . . . . . . . . . .2
D- MITER GAUGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
E- MITER GAUGE STORAGE BRACKET . . . . . . . . . . . . . . .1
F- RIP FENCE STORAGE BRACKET . . . . . . . . . . . . . . . . . .1
G- 8 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
H- 3 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
I- 10-12 MM OPEN END WRENCH . . . . . . . . . . . . . . . . .1
J- FOOT BRAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
K- CAP SCREW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
L- LOCK WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
UNPACKING
ADDITIONAL REQUIREMENTS FOR SET UP
• Extra person for help with lifting
• Phillips screwdriver
• Flat head screwdriver
• 10 mm wrench
• 15 mm wrench
• Feeler gauge set
• Combination square
8
B
C
D
E
F
J
G
H
I
K
L
Note: Deluxe Excalibur Universal Bandsaw Rip Fence Sys-
tem is packaged separately. Refer to the manual supplied
in the box with the Excalibuer Rip Fence for complete list
of contents.