General tools EP8711P, User Manual, Page: 9 / 16

To display the dew point temperature ,
press the MODE button again. DEW will
replace TEMP on the top line of the LCD.
To display the wet bulb temperature , press
the MODE button again. DEW will disappear
from the top line of the LCD and be
replaced by
WET on the bottom line.
To display the mixing ratio (absolute
humidity)
of the environment, press the
MODE button again. MIX will replace WET
on the bottom line of the LCD.
To display the enthalpy of the environment ,
press the MODE button again. ENTH will
replace MIX on the bottom line of the LCD.
How pressing the MODE button changes
the measured parameter
For all parameters except RH, the EP8711P
will automatically display readings in
Imperial units.
To switch to metric units
for ambient, dew point or wet bulb
temperature, mixing ratio or enthalpy, press
9