13
Maintenance
1. Turn off the water tap and pull out electricity
plug after each wash. Open the porthole to
prevent formation of moisture and odors. If the
washing machine is left idle for a long period,
drain the water in the machine and replace the
drainage hose.
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soap liquid to clean the machine case and
rubber components. Do not use organic
chemicals or corrosive solvents.
3. Clean the detergent distribution drawer
regularly.
Swing out the drawer, flush it clean with
water and then replace it.
Remove all the packing materials to prevent
vibration during use.Upon opening of the
package, water drops may be seen on the
plastic bag and the porthole. This is normal
phenomenon resulting from water test in the
factory.as shown in Fig 1.
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-
vibration components inside of the washing machine
during the transportation process. Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate
and take out the rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be
kept in a safe place for later use)
Fig. 2
Adjusting the washing machine
There are adjustable feet under the bottom of the
washing machine. Before use, the washing machine
should be adjusted, as shown in Fig. 3, so that it is
level.
Fig. 3
Installation
Fig. 1
4. Clean the filter Cleaning methods (once a month)
1) Push out the outer cover (Fig. 1);
2)Screw out filter by turning counterclockwise (Fig. 2);
3) Flash clean with running water;
4) Replace the filter by turning clockwise and remount the
cover.
Caution: The filter must be in place, or it may lead to
leakage.
Fig1
Fig2
Fig3
