P.O. Box 3547 / Johnson City, TN 37602 / 1-800-414-4661 / www.GeneralShale.com
Step
2
Build the fire pit.
Each course will use (15) block "A" circle block landscaping stones.
4
“Entertainer” Fire Pit (FPR-100) Assembly Instructions
Dry stack courses 1 through 4 and check fit before applying thin set.
Adjust gap and position block as needed.
Mix supplied thin set according to package directions. Apply a thin
layer uniformly using a small trowel between all pieces and courses.
Apply thin set toward the inside of the fire pit to prevent it from
potentially squeezing out onto the outside face of the stones.
For best appearance, the vertical joints of each following course should
align with the center of the stones from the course below. (See Course 4
image on page 5)
Adjust the position of units as required to maintain uniform level and
square courses. (Pre-packaged shims, pieces of roof shingles or metal
washers can be used as shims)
Courses 1 through 4
(15) Block “A” Circle Landscaping Stones
Level stones by tapping with rubber mallet as needed. Use caution to
avoid squeezing thin set out from between stones.
Outdoor Living Products
Helvetica Neue LT W1G
75 Bold
9 pt
<VA> -30
